How to install polystyrene skirting boards: Transform your decor with ease!

If you want to give a special touch to your spaces and enhance the aesthetics of your home, installing polystyrene skirting boards is an excellent option. In addition to being light and easy to handle, these skirting boards guarantee an elegant finish capable of harmonizing with different furnishing styles. With a wide variety of designs available, you can choose between more classic or contemporary models, allowing your personality to be reflected in every detail of the space.

Installing a polystyrene skirting board is an accessible task and can be done by anyone, even without previous construction experience. With a few basic tools and a little patience you can transform your home, giving it a more sophisticated and refined look.

In this guide we will share a complete step-by-step guide, full of practical advice, so that you can install your polystyrene skirting board safely and precisely. Get ready to renovate the look of your home and guarantee a perfect finish that will make a difference in your decor! Let’s take this transformation journey together?

Discover the polystyrene skirting boards from Rodapé Shop.

Learn step by step how to install polystyrene skirting boards

Let’s explore a detailed step-by-step guide, with tips and tricks to ensure a flawless finish. Get ready to give a special touch to your home and make your walls even more elegant!

Required materials and tools

• Polystyrene plinths (choose the desired model)
• Tape measure
• Pencil
• Saw for precise cuts (hand saw or jigsaw)
• Glue for polystyrene OR contact glue
• Level (optional, but recommended)
• Brush or cloth for cleaning.

Photo: reproduction

Measure the space

Measure the perimeter of the room where the skirting board will be installed. Use the tape measure to determine how much baseboard you need.

Remember to consider seams and possible cuts and always buy something extra to avoid shortages.

Cut the footer

Using a saw, cut the skirting board according to the measurements obtained. For corners, make cuts at a 45-degree angle for a better finish. This can be done with a square or miter saw, if available.

Surface preparation

Before application make sure the wall and floor are clean and dry. Remove dust and residue that could make it difficult for the skirting board to adhere.

Footer application

Apply an even layer of glue to the back of the baseboard. Place the skirting board on the wall, aligning it with the floor. Press firmly to ensure adhesion.

Footer fix

After positioning the skirting board, maintain pressure for a few seconds to make the glue adhere well. If you wish, you can use small nails or staples to hold the baseboard in place while the glue dries, but this is usually not necessary due to the good adhesion of Styrofoam glue.

Don’t miss the opportunity and discover the finishes at Rodapé Shop.

Why choose polystyrene skirting?

Let’s explore the main reasons why polystyrene skirting is the ideal choice for those looking for a durable, high quality finish. Whether it’s protecting your walls or adding a sophisticated touch to the space, you’ll find that this option can transform your home easily and effectively.

Lightness and easy handling

Styrofoam skirting is very light, making it easy to transport and install. This means that even people with no DIY experience can work on it without difficulty.

Simple installation

Installing polystyrene skirting boards is practical and quick. It requires no complex tools and can be easily cut with a utility knife or saw, allowing for adjustments as needed.

Moisture resistance

Unlike wooden baseboards, which can rot or warp in humid environments, Styrofoam is resistant to moisture. This makes it ideal for kitchens, bathrooms and covered outdoor areas.

Durability

Styrofoam skirting is durable and impact-resistant, meaning it does not wear out easily and can maintain its appearance for long periods, even in high-traffic areas.

Variety of styles

Available in different sizes and finishes, polystyrene skirting boards can be found in designs that adapt to different furnishing styles, from classic to modern, allowing you to choose what best suits your environment.

Cost-benefit

Generally, polystyrene skirting boards are more convenient than wooden or ceramic ones. This allows you to get a beautiful, quality finish without compromising your budget.

Advanced installation tips

Solve common challenges

• Uneven walls: if the wall is not straight, apply an extra amount of Colla Santa Luzia 420 g to fill small gaps. Use a level to ensure alignment and press firmly.
• Complex Angles: For non-standard 90 degree angles, measure the angle with a protractor and test cuts on spares before cutting the main baseboard.
• Excess glue: If glue leaks, wipe it off immediately with a damp cloth. For dried residues, use a diluted vinegar solution without damaging the finish.
• Precise Cuts: Use a fine-toothed saw or miter box for 45-degree cuts. Lightly sand the edges with fine sandpaper for a perfect fit.

Professional advice for a flawless finish

• Paint first: Paint the baseboard with acrylic paint before installation to avoid touching the wall. Apply a primer for better adhesion.
• Dry Test: Place all pieces of skirting along the wall without glue to check measurements and cuts, saving time and materials.
• Spacer: place a thin piece of cardboard (approximately 2 mm) between the skirting board and the floor during installation to create a minimum space, making cleaning easier and allowing the floor to expand.
• Temporary support: For long sections, use masking tape to hold the baseboard while the glue dries, ensuring a firm hold.

Tips for maintenance and durability

• Cleaning: use a damp cloth with neutral detergent. Avoid abrasive products to preserve the finish.
• Protection: Apply a sealant to painted baseboards to protect them from scratches and stains, especially in high-traffic areas.
• Sun exposure: In environments with strong sunlight, use UV-resistant paint to avoid fading.
• Regular inspection: Inspect baseboards annually for loose parts and reapply glue if necessary to maintain grip.

How to choose the ideal footer?

Choosing the ideal skirting board for your space may seem like a challenging task, but with a few practical tips you can make a choice that will enhance the beauty of your space. It is important to consider factors such as the decorative style, material and functionality of the baseboard. A well-chosen skirting board not only complements the aesthetics of the room, but also brings benefits such as protection and durability. To help you in this choice, explore the different options available and take advantage of the news that Rodapé Shop has to offer you. You are sure to find the perfect option for your project!

So, did you like it?

Have you made it this far? Take this opportunity to leave your feedback on today’s content!

On Rodapé Shop we have a selection of high quality products that will add charm and functionality to your environments.

Be sure to explore our new arrivals and get inspired by the latest decorating trends. Our team is always available to help you create a space that reflects your personal style and offers comfort.

Thank you for visiting Rodapé Shop! Stay tuned for our updates and see you next time!

Frequently asked questions

What is the difference between polystyrene skirting boards and other materials?

The polystyrene skirting board is light, easy to handle and resistant to humidity. Unlike wooden baseboards, which can warp or rot, Styrofoam does not suffer from these problems. Furthermore, its installation is simpler, since it does not require special tools and can be cut easily.

Can I paint polystyrene skirting boards?

Yes, the polystyrene skirting board is paintable. We recommend using acrylic paints or water-based enamels as they adhere well to the material. Be sure to apply a coat of primer before painting to improve paint adhesion and ensure a smooth finish.

Is it necessary to use specific glue to install polystyrene skirting boards?

Although there are specific glues for polystyrene, you can use an excellent quality contact glue. The important thing is to make sure that the glue is suitable for the material and that it creates a strong bond. Always check the manufacturer’s instructions for best results.